Use one of these Masonry drill bits to create pilot holes into hard earth to help the deployment of your longer GroundGrabba Pro I or Pro II or commercial range GR14's.
What You Get
Your choice of:
- 1x 12mm x 300mm Masonry Drill with HEX shaft / shank
- 1x 12mm x 600mm Masonry Drill with HEX shaft / shank
- 1x 12mm x 600mm Masonry Drill with SDS shaft / shank
- 1x 15mm x 900mm Masonry Drill with SDS shaft / shank
Specifications
300mm Model
- 12mm x 300mm
- 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro possible.
- Made of hardened steel with a tungsten tip.
- Speed Hex clip in style shank
Weight: 175 grams
Dimensions: 12 × 300mm
600mm Models
Hex Speed Shank
- 12mm x 600mm
- 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of your GroundGrabba Pro, Pro I or Pro II possible.
- Made of hardened steel with a tungsten tip.
- Speed Hex Clip in style shank
Weight: 250 grams
Dimensions: 12mm x 600mm
SDS Shank
12mm x 600mm
12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro, Pro I or Pro II possible.
Made of hardened steel with a tungsten tip.
SDS shank
Weight: 250 grams
Dimensions: 12mm x 600mm
900mm Model
SDS Shank
15mm x 900mm
15mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro, Pro I or Pro II & our commercial GR14 range possible.
Made of hardened steel with a tungsten tip.
SDS shank
Weight: 400 grams
Dimensions: 12mm x 600mm
Additional Information
If you go camping on really hard compact ground and you’re finding it almost impossible to drive your GroundGrabba Pro, Pro I or Pro II into the ground then try pre-drilling the ground using this 12 x 600mm masonry drill bit.
You may need to drill the ground an inch or two at a time and keep clearing the hole if the ground is ‘that’ hard. Perhaps you may also need to widen the hole too.
Video
Disclaimer
⚠ Caution:
❌ Do not use in grounds where there are underground services such as but not limited to: electricity, gas, phone, data, water.
❌ Do not use GroundGrabba products for any other purpose other than ground anchoring.
- Misuse or abuse of GroundGrabba products can lead to injury or worse to the user or bystanders.
- Not to be used with mains powered drills.
- When using Battery drills please refer to the drill manufacturers warnings and safety instructions prior to use with GroundGrabba products.
- Only use GroundGrabba products for their intended purpose of ground anchoring things such as tents and shade canopies.
- Always hold your drill firmly with both hands and use the inside of your legs as a drill guide with the drill handle in between your legs to help prevent torque twisting wrist or other injury.
- Always start your drill on the lowest torque setting.
- Use a good quality high torque drill or impact wrench.
- For hard or extremely hard grounds we recommend pre drilling a minimum of a 12mm pilot hole to help with insertion.
- Some grounds will be impenetrable.
- Use the correct GroundGrabba for the job.
Warranty
Masonry Drills come with a twelve month manufacturer defect replacement warranty
*conditions apply
